Perky

45 x 45 x 94 cm | glass, steel, satin cord | €650,-

I had this stand at home for six years and finally found the right hood to go with it. Due to the bottom edge, the shade falls over the fitting holder and does not stand too high on the leg. The frame was once sprayed white, but in this case not nice because I wanted to see the iron (just like the ornaments on the base). I very patiently 'snapped' the paint off with pliers. Fortunately, the result was satisfactory. I used three colors, metal, light green and moss green. Due to the thread density, the knotted cord runs very smoothly downwards. And the border is a beautiful, subtle closure at the end. I think it's a perky heat petit, hence Perky. I also had to pull new wire and saw 2 short pieces of wire coming out of the glass ball. The very small light in a clamp was broken. I replaced it and when everything was connected, the extra light in the base came to life. And on top of that, a round green drawing appears on the surface. What a party!

Free trial placement